The Lee Auto-Disk Riser allows use of other brands of dies that have extended adjusting screws and provides clearance for the Lee Safety Prime.
Automatic dispenser of powder and accurate measure.
This kit raises the hopper so you can stack two disks. This not only doubles the capacity of the disks but it makes very fine adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
DELUXE PERFECT POWDER MEASURE
Accurately measures small charges below the range of the standard Auto Disk Powder Measure. Six cavities range from 1.1 to 2.5 grains of Bullseye. This is an ideal kit for small caliber cases and light target loads. Can be used on the Auto-Disk or Pro Auto-Disk Powder Measures.
A large, unbreakable funnel that fits all cases from .22 to .45 caliber. Hole in flange permits mounting to the Lee Turret Press, shelf or bench.
Lee Powder Measure Kit Fifteen uniformly graduated and proportioned powder dippers. Slide card shows the grains of powder each measure will dispense of every type of powder.
This die is used to charge small capacity rifle cases using the Auto-Disk Powder Measure. It works the same as the pistol powder through expanding dies except it doesn't expand the case mouth. Rifle case expansion is normally done in the sizing die.
Simple powder scale at small price !!!
The 1200 DPS PC Interface accessory allows you to transfer memory directly from your computer to your DPS System.
The Funnel Pan that saves time for the Reloader
A must for accurate powder weighing