shop by category

Home

Left Banner

  • Fiocchi

RELOADING

Reloading ammo for rifled guns

Subcategories

Active filters

Auto.Disk Riser
  • Out-of-Stock
Auto.Disk Riser

The Lee Auto-Disk Riser allows use of other brands of dies that have extended adjusting screws and provides clearance for the Lee Safety Prime.

€13.00
Lee 4 tube adapter bullets
  • Out-of-Stock
Lee 4 tube adapter bullets

Multi-Tube Adapter for Bullet Feed Kit

Four tube magazine keeps Lee Bullet Feeder fed with a continuous supply of bullets. Quickly and easily installed. Includes large and small adapters, four large and small feed tubes and cylinder, plate assembly.

€29.90
Lee Case Collator
  • Out-of-Stock
Lee Case Collator

Fills all four tubes in just ten seconds.

For the Pro 1000 or Load Master

€17.00
Lee Chamfer Tool

Must be used after Case Trimming. Unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets of G.I. brass. Works better than tools costing several times as much.

€4.70
Lee Classic Turret
  • On sale!
Lee Classic Turret

Classic Turret the instant change caliber press at best price in Europe !!!

€228.00
Lee decapping die
  • Out-of-Stock
Lee decapping die

An absolute must for those who clean cases before reloading. Cases need not be clean nor lubed when using this die. Tough, almost unbreakable decapper easily removes crimped in primers. One size fits all.

€18.00
Lee micro disk
  • Out-of-Stock
Lee Lee micro disk

Accurately measures small charges below the range of the standard Auto Disk Powder Measure. Six cavities range from 1.1 to 2.5 grains of Bullseye. This is an ideal kit for small caliber cases and light target loads. Can be used on the Auto-Disk or Pro Auto-Disk Powder Measures.

€10.37
Lee Lee powder full

A large, unbreakable funnel that fits all cases from .22 to .45 caliber. Hole in flange permits mounting to the Lee Turret Press, shelf or bench.

€5.30
Lee powder measure kit
  • Out-of-Stock
Lee Lee powder measure kit

Lee Powder Measure Kit

Fifteen uniformly graduated and proportioned powder dippers. Slide card shows the grains of powder each measure will dispense of every type of powder.

 

€18.00
Lee Primer Cleaner

Double ended design cleans both large and small primer pockets. Primers can be fully seated for better accuracy and safety. Costs so little and works so well, no reloader can afford to be without one.

€4.00
Lee Ram-Prime
  • Out-of-Stock
Lee Lee Ram-Prime

Primes on the press up-stroke for a more sensitive feel. Includes easy to change punches for both large and small primers. Fits all brands of presses. Same tool as supplied with the Challenger and Hand Press Kit.

€18.00
Lee resize lubrificant

Another first by Lee. We purchased the finest automotive deep draw lubricant and had it custom packaged exclusively for us. Lee Lube is pleasant to handle and you can thin it with water. Non-sticky, nonallergenic. Very little is needed; it goes a long way. Eliminates stuck and dented cases and makes sizing less work.

€6.80
Lee Lee Rifle Charging Die

This die is used to charge small capacity rifle cases using the Auto-Disk Powder Measure. It works the same as the pistol powder through expanding dies except it doesn't expand the case mouth. Rifle case expansion is normally done in the sizing die.

€18.00
Lee Lee shell plate carrier

To change calibers, the entire Shell Plate Carrier can be replaced. Each unit comes complete with Shell Plate, Auto Prime, Case Ejector, Auto-Index and spare parts.

€51.85
Lyma flash hole uniformer

This handy tool removes internal flash hole burrs. Features a tool steel cutter which is inserted into the flash hole through the case neck. Adjustable stop collar allows use with any size case. Burrs are removed with a clockwise turn. Fits .22 to .45 Calibers.

€22.90
Lyman tornio Multipack
  • Out-of-Stock
Lyman Lyman tornio Multipack

The new Universal Carbide Case Trimmer features a premium Carbide Cutter Head with a fine grain and ultra-sharp cutting edge. The new Carbide Head will hold its edge longer, making this Trimmer ideal for volume reloaders. The popular patented Universal Chuckhead handles any case from .17 caliber to .458 caliber with no collets required. The Trimmer includes 9 of the most popular pilots.

€149.00